Author Topic: GTL Help  (Read 1274 times)

[SJ]FAR

  • *
  • Posts: 984
GTL Help
« on: November 12, 2007, 12:22:51 pm »
Hi guys,

after having my first weekend with GTL for a long time i experienced 2 problems which maybe are already known from you and you maybe have solution.

1. I can`t assign in GTL all my buttons from the G25 gear-shifter-module? Three buttons from the upper four don`t work...In GTR2 and Rfactor they work all..any idea??

2. Not every race is in the replay-folder. And some of them are not complete...

The enduro-run replay from friday started some laps after the real race start.
Race 1 from the OSJ-League wasn`t recorded
Race 2 from the OSJ-Leagus was recorded but didn`t show all the cars who drove...only 4 of them which stood right behind and before me were there...

 :?:

Frank.

[SJ]Kristof Huyck

  • *
  • Posts: 2686
Re: GTL Help
« Reply #1 on: November 12, 2007, 12:39:23 pm »
1. Just tried and I have the same problem, however I don't use those buttons. 2 buttons on the wheel and 3 red buttons are all I use in GTL (and from those 3 reds, 2 are to say "sorry" and "thank you"  :biggrin:)
2. Some weird issues you got  :?:
I guess you already have set you PLR correct, but just to be sure:
"Replays Dated="1" // Replays have date in filename"
Otherwise the replays got overwritten every time...

Only happened a few times that I got issues with the replays (and I've done lots of GTL races  :))


[SJ]Jarkko Rantajoki

  • *
  • Posts: 12811
Re: GTL Help
« Reply #2 on: November 12, 2007, 02:23:27 pm »
About 1.

Its very unfortunate with GTL, i have to use a separate app with my button box if i want to use it with GTL, i reckon even GTR2 requires that.. Only will understand the buttons to certain amount or something.. (rFactor is again superior.. oh and Race07)

I use a program called key delay to set my controller buttons to work as keyboard key, but i reckon using the profiler would work for G25 users (if yer silly enough to use it i mean).

[SJ]OldGreazy

  • *
  • Posts: 1065
Re: GTL Help
« Reply #3 on: November 12, 2007, 04:09:59 pm »
I'm able to use those keys on my G25 but I have to run the Logitach profiler to assign them as a key on the keyboard. You can assign the POV to the up,down,left, right arrow keys this way also. I just made One profile for GTL and one for RFactor it it works great.

[SJ]Stein

  • "The Watchdog"
  • *
  • Posts: 9033
Re: GTL Help
« Reply #4 on: November 12, 2007, 05:35:10 pm »
i think it's because the G25 arrived after GTL had been there for a while.. and yes.. i have the same issue.
I use the pov for look left and right (hardly use it though) pov down for handbrake (just incase the car rolls off the startgrid once you put it in gear (you could get a stop& go for it)
on the wheel i got the lookback and ptt (push to talk for ventrilo)
on the shifterunit i've got lcd, pitlimiter, lights and starter


Woof ~ Woof